Slumping Mold - Square Appetizer Serving Platter Dish

Slumping Mold -  Square Appetizer Serving Platter Dish

This Serving Platter is a functional mold design that makes a dish that can be used daily! it is sized perfectly for use at a party to serve your favorite appetizers!

Start with a 12 x 12 Sheet of base glass.  To create a pattern to make your own glass start by flipping the mold over onto your glass and trace it on with a felt tip marker pen. Cut into the curve until just before the corner, flare out the cut to the outer edge of the glass, continue your cut or use a circle cutter and then flare out to the edges as separate cuts. Then using a breaker at each flare to remove the excess glass.  Finally add all of your decorate glass accessories and then full fuse. You want the design to be about 4 to 5 mm thick glass, more than a standard 3 mm, as it will be handled a lot by guests and you want it more durable. 

Finally, after it is at least tack fusing the pieces together, perform a slump fuse it into the mold.

Go Fusing and create a functional Appetizer Serving Platter Dish Today!

Ceramic Mold Dimensions:

12" L x 9" W x 1.25" Deep (30.48 cm x 22.86 x 3.17 cm)

USE:

1. We suggest elevating your mold at least a 1/2 inch off of the shelf for even heat distribution.
2. Smooth the mold surface with fine sandpaper so it accepts kiln wash uniformly.