Fusing Adhesive No Days Powder Wafers Sheet

No Days Fusing Adhesive Powder Wafers Sheet

This amazing product has inspired us a Go Fusing to create an entire product line ready for your use.  Check it out here to see our 3D inspirational precut glass shapes!

Glass Fusing With Glass Powders and the No Days Fusing Adhesive can give you new inspiration, let you design with out adding weight to your artwork and all you need is a pair of scissors to alter any fusing design on the fly!

Here are the step by step instructions to get started:

1. Trace your design onto the Powder Wafer sheet with a fine tip marker. Cut with scissors, razor blade or using a cutting machine.
2. Using a silicone pad or the enclosed sheet, spread your powder glass frit (any Coe) to created a base.
3. Place your shape on the powder frit and coat it completely with more powder frit.
4. kiln fire to 170 degrees Fahrenheit and you can see the outline of the shape.
5. Cool until room temperature.
6. Remove Excess Powder.
7. Your wafer is ready to fire.

Can apply directly to the fusible glass or assemble, separately and create layers and then position on the glass.

• 12" x 12" sheet size fits cutting machine mats
• Best use is fine frit powder
• Non-toxic and easy to use
• Create simple or intricate powdered glass elements
• Fire all pieces at the same time
• Activate by turn the kiln on full to 200ºF (90ºC) for 12-15 minutes.

Safety Tip: Always use a respirator when working with glass powder.

Recommended Reading: What is a COE 96 Precut Glass Wafer?
(Includes Kiln Firing Schedule for Glass Wafers)

YouTube instructional Video (Tab under photo)

No Days Fusing Adhesive in a Powder Wafers Sheet will give you design freedom!