96 COE Glass Shape Precut Large Dragonfly Wafer Set

96 COE Glass Shape Precut Large Dragonfly Wafer Set

There are two Large fusible precut 96 COE Glass Wafer Dragonfly Shapes.  This set of two are covered in a Pearlescent Interference Powder Colors to give a Blue or Violet Iridescent shimmer!  Each is only 1 mm thick.
At 3 1/2 inches wide and 2 1/2 inches long, they are life like in size.  They are perfect for nature scenes or for making a Night light as they won't add thickness and the light will increase the shimmer effect!

Did you know the Dragonfly can mean hope, change, and love and has been the symbol of a new beginning for hundreds of years.

When firing, make sure to go slow and read the blog article (below).  The wafer will fire flat and smooth but if you are adding frit you can leave them dimensional at a tack fuse.  If you decide to fire the entire design to a full fused, then we recommend adding clear power frit over the entire tree.  then any layer medium frit.  

Example shows a Fused Glass Dragonfly Project using small pieces of glass Stringer.

As with all wafers we suggest a light coating of water clear powder to reduce shrinkage.

Oceanside Glass Color Mix:

COE 96
Sea Green
Powder  F1-5281-F
Fine  F2-5281-F 
Water Clear Powder F1-00-96
Light Blue Transparent F1-132-F

Wafer Shape Dimensions: 
Dragonfly Wafer: 3 1/2 inches wide and 2 1/2 inches long (3.5 x 2,5)

Glass Thickness: 1mm

Recommended Reading: What is a COE 96 Precut Glass Wafer?
(Includes Kiln Firing Schedule for Glass Wafers)

Accessory Glass Precut Shapes: Made in the USA